Argentium Sterling Silver shark
teeth jewelry
Argentium Silver .935 sand dollar jewelry made in the USA at our shop in Pennsylvania. This has .935 silver, rather than .925 of sterling silver. Each of these shark teeth were molded from a found shark tooth fossil or from an old pre-ban legal collection. Excellent tarnish resistance and superior hardness. There is no coating, just pure Argentium 935 silver. These are Seawear trademarked designs under #VA0001330803 and #VA0001233947 hand crafted under the lost wax casting method, work hardened with four stages of centrifugal tumbling and then with hand finished polishing.
#ASGW105 - $245.00
Argentium 935 very large great white shark tooth. App 39.6gms and just over 2" long or 52mm along the left hand side. This great white shark tooth was molded from an actual fossil and shown here on a stand sized business card. No modern sharks were harmed. Most natural age cracks and lines are visible. We can polish everything smooth, but try to keep them looking as much as the original as possible. The root is just over 1/4" thick. The enamel is polished smooth and the gum root has a satin diamond finish that sparkles and refracts light back into itself. On the above picture it took the artificial light and makes it appear yellow. It is not.
#ASTS107 - $195.00
Argentium 935 silver large tiger shark tooth. App 17gms and just over 1.25" or 32mm along the right hand side. Enamel portion is polished and the root gum portion is a satin diamond sparkle finish. This is a large tiger shark tooth on a standard business card.
#STMEGAGW - $175.00
Great white monster shark tooth! At 26.6gms it is nearly an ounce. In 14kt it is $2,500ish This is Argentium .935 silver. From the left hand corner to the man tearing tip is 46mm or just over 1.75 inches. Including the built in fixed bail it is 53mm or 2 1/8" as that is the dangle length. This is molded from a pre-historic fossil shark tooth, megalodon. We have maintained most of the accuracy with age lines and fissures to keep the mass and weight as high as possible to the original. If you are on a pc and not a phone, this image will show extreme detail of the megalodon great white shark tooth jewelry necklace! Bail opening is 5mm or nearly 1/4"
#ASGWST2 - $145.00
Great white shark tooth jewelry necklace pendant. This one weighs 21.5gms, more than 2/3 of an ounce. From the left hand corner to the tip is 1 5/8" or 41mm. The total dangle length with the bail is just over 1 3/4" or 45mm. The bail is heavy duty, swivels and will accept up to 1/4" chain, leather cord or braided line. This tooth needs something strong. All the original crevices, growth & aging lines and imperfections have been left intact in the shark tooth rather than polish them out. The enamel portion is polished and the gummed upper tooth is satin finished. The bail opening and entry hole for the bail pin has been polished, flared and beveled. Even on the back side. And if you choose to wear it with a black pirate t-shirt!
#ASTST - $125.00
Tiger shark tooth. This is a large and heavy one! 12.7gms The gum portion has been satin finished and the enamel portion is highly polished. 1 1/8" without the bail.Just the way it hangs. This is rather thick at 1/4". Every natural line, grain and pore has been left within the tooth. This is full round, 3D solid and does NOT have the back scooped out. Each of these are unique and the image will change as the tooth sells and a new one is made.
#ASGWST - $125.00
Great white shark tooth jewelry pendant. This one weighs 12.3gms, more than 1/3 of an ounce. From the right hand corner to the tip is 1 3/8" or 35mm. The total dangle length with the bail is just over 1 3/4" or 46mm. The bail is made of 14 gauge Argentium 935 wire and left large enough to fit through any chain up to 5/16" or 8mm. This is 3D full round finished on all sides. The finish has been left more natural showing the lines in the enamel, the gum portion is satin finished while the tooth is polished and the very tip is extremely polished. The tooth has retained it's natural curve inwards and not been altered in the wax stage. This has .935 silver, more than .925 sterling silver
#STGWMAS - $95.00
Great white shark tooth medium sized jewelry pendant. This one weighs app 10gms, the bail does not swivel and is cast as part of the tooth. From the right hand corner to the tip is 1 5/16" or 34mm. The total dangle length with the bail is just over 1 11/16" or 43mm. The bail opening is 1/4" or 5mm. This is 3D full round finished on all sides. This is all polished and we can satin the gum or tooth if you wish. This has .935 silver, more than .925 sterling silver.
#ASTST113 - $95.00
Tiger shark tooth ready to rip and tear in a frenzied pool of red. Solid 3D, app 7gms. 1" tall along right side, bail opening for up to 4mm chain without rounding. 3/16" at thickest point. All high polished with the gum then detailed with a diamond bit for matte and sparkle contrast. Wear it on a charm bracelet, anklet or necklace.
#AG1988 - $45.00
Australian tiger shark tooth. Just over 3/4" on right side. 1" dangle length with bail. Approximately 4.4gms with amazing wear properties compared to standard sterling silver .925 The gum portion of the tiger shark tooth is satin finished while the exposed enamel portion is high polish
