Trinity Knot Engagement Ring
#TRIN2750 - $495.00 as shown
Celtic trinity knot engagement ring setting ready for you to choose your prongs or diamond setting to be installed. The trinity engagement ring is ready for peg mount setting, but any style will work. The front of the ring is 5mm wide and rises 4mm from the top of your finger. The width tapers to 3mm wide in the rear and near 2mm thick. The opening for the prongs is 5mm wide. There is plenty of room to file away edges for a larger opening if needed.
The ring comes in one color. If your jeweler adds white prongs, you may opt to have them rhodiuim plate the trinity knots white as well.
This model trinity knot engagement setting is a size 6.5, weighs 5.9gms and is priced at $495.00 USD as shown. Having it made to size will increase the cost and time. The ring is available in yellow, white, rose or green gold; 18kt palladium white gold or platinum. Allow 2-4 weeks for yours to be made. These are Irish designed and American made!
Above trinity knot engagement ring can be seen in this batch of newly cast rings. Just completed 36 hours of extra fine walnut shell tumble and on to the hand polishing.
